Benjamin Moore · HC-172
Revere Pewter on house exteriors
- Color family
- Warm greige
- Digital swatch
- #CBC6B8
Where I’d start
Compare the painted wall with the stone beside the entry. Look for a transition you like in both shade and sun.
See Revere Pewter on more houses
Look at the color next to the roof, stone or wood you’d actually be keeping.
Suburban home with brick
Painted siding and a garage beside natural brick
Open this houseMountain workshop
Dark metal roof and wood garage doors
Open this houseBungalow with brick porch piers
Painted siding beside natural brick
Open this houseSame house, three colors
Start at the edge where the siding meets an existing finish. Then step back and compare the whole facade.
Revere Pewter
Benjamin Moore · HC-172Cream stone and a sheltered front door.
Accessible Beige
Sherwin-Williams · SW 7036Accessible Beige is the beige comparison. Start where the siding touches the masonry.
Edgecomb Gray
Benjamin Moore · HC-173Edgecomb Gray is a lighter direction. See whether the stone becomes the deeper element.
How we compared them. Recoat applied each named paint to the same prepared siding area of an illustrative demo photo. Each view uses the same framing and original finishes around the painted area.
Before you pick a sample
Choosing between shades?
Can Revere Pewter work with tan stone?
Start by matching it against the stone you actually have. If the stone has mixed gray and tan pieces, hold the board across both rather than picking the most flattering single piece.
See Accessible Beige in its own guideBefore you buy a gallon
Three checks to make where you’ll actually paint.
Start with the hardest spot
Start where the siding meets the finish you’re keeping.
Compare generous samples
Set Revere Pewter and your closest alternative next to each other on separate sample boards.
Look in different light
Look from the sidewalk, then move the sample under the eaves to see the shaded version.
